HackerReposA FIELD GUIDE TO OPEN SOURCE
ProSponsor the shelf♧ 0
← Back to top all-time
Ralim
IronOS
C2017–2026
Ralim / IronOS

IronOS

Open Source Soldering Iron firmware

17Distinct people
22Mentions
1Explicit recommenders
8.4KGitHub stars
REPOSITORY AT A GLANCE

What to know before exploring

What it is

Open Source Soldering Iron firmware

GitHub

Where it is used

No documented product use was verified in the last source check.

What people are saying

Oh boy, nice idea, but this looks complicated and time consuming. I recommend to get some good equipment first: - solder fume extractor (see below) - extra thin high quality…

sandreas used a recommendation phrase. One indexed comment matches. This is a phrase match, not a verdict.

No classified warning is attached to this page. Read the discussions before treating silence as approval.

Also in these discussions

No other repository is repeatedly linked in the same discussions.

This week on Hacker News

Nov 9–Nov 16 UTC · Direct repository links and separately labeled related project stories. Indexed through 11/16/2026, 4:59:52 AM UTC.

No direct repository links were found in the indexed HN discussions over the past seven days. Older discussions are available below.

Mentions over time

HN mentions by year22 dated mentions

Observed mentions: 2017-07-25 21:15:49 UTC to 2026-09-03 15:37:00 UTC.

02462017-01-01 00:00:00 UTC to 2018-01-01 00:00:00 UTC (exclusive): 1 mentions; 0 submissions, 1 comments20172018-01-01 00:00:00 UTC to 2019-01-01 00:00:00 UTC (exclusive): 0 mentions; 0 submissions, 0 comments2019-01-01 00:00:00 UTC to 2020-01-01 00:00:00 UTC (exclusive): 0 mentions; 0 submissions, 0 comments2020-01-01 00:00:00 UTC to 2021-01-01 00:00:00 UTC (exclusive): 3 mentions; 0 submissions, 3 comments2021-01-01 00:00:00 UTC to 2022-01-01 00:00:00 UTC (exclusive): 1 mentions; 0 submissions, 1 comments20212022-01-01 00:00:00 UTC to 2023-01-01 00:00:00 UTC (exclusive): 3 mentions; 0 submissions, 3 comments2023-01-01 00:00:00 UTC to 2024-01-01 00:00:00 UTC (exclusive): 7 mentions; 1 submissions, 6 comments2024-01-01 00:00:00 UTC to 2025-01-01 00:00:00 UTC (exclusive): 4 mentions; 0 submissions, 4 comments2025-01-01 00:00:00 UTC to 2026-01-01 00:00:00 UTC (exclusive): 0 mentions; 0 submissions, 0 comments2026-01-01 00:00:00 UTC to 2027-01-01 00:00:00 UTC (exclusive): 3 mentions; 0 submissions, 3 comments. Incomplete calendar period.2026*

* An incomplete calendar period is marked with an outlined bar. Its count is not directly comparable with a full period.

Counts come from the repository’s dated source evidence. Index cutoff: 2026-11-02 08:16:59 UTC.

View mention counts and date ranges
UTC ranges include their start and exclude their end. Select a period to filter the source evidence.
PeriodStart (UTC)End (exclusive, UTC)MentionsSubmissionsComments
20172017-01-01 00:00:00 UTC2018-01-01 00:00:00 UTC101
20182018-01-01 00:00:00 UTC2019-01-01 00:00:00 UTC000
20192019-01-01 00:00:00 UTC2020-01-01 00:00:00 UTC000
20202020-01-01 00:00:00 UTC2021-01-01 00:00:00 UTC303
20212021-01-01 00:00:00 UTC2022-01-01 00:00:00 UTC101
20222022-01-01 00:00:00 UTC2023-01-01 00:00:00 UTC303
20232023-01-01 00:00:00 UTC2024-01-01 00:00:00 UTC716
20242024-01-01 00:00:00 UTC2025-01-01 00:00:00 UTC404
20252025-01-01 00:00:00 UTC2026-01-01 00:00:00 UTC000
2026 (partial)2026-01-01 00:00:00 UTC2027-01-01 00:00:00 UTC303

What Hacker News says

3 sources
The TS100 and the subsequent TS80 soldering irons were innovative for a few reasons. The heating element is in the tip rather than the body of the iron. This means it can reach a high temperature (e.g. 350C) using much less power than a traditional iron. This means that it can be powered with a USB power bank and makes it a great iron for using off the grid or in the field. This also means it's very lightweight which makes it easier to handle for delicate soldering work. Even if you're working at your desk, being able to power it with a portable power bank means you can more easily move the power cable so it does not get in the way (also I believe the TS80 comes with a silicone USB cable which is really flexible and easy to manipulate). Another nice feature is that it has an accelerometer which means it can automatically drop to a lower
Read the rest
temperature when it's placed down making it a bit safer. Lastly, the firmware can be replaced and people have added features such as a temperature boost mode, power level monitoring and so on: https://github.com/Ralim/ts100 Normally, you can get these irons for $80-$90 so a $24.99 iron that uses the same tips and software would be an absolute bargain.
In Pine64 announce the Pinecil, TS100 compatible RISC-V soldering iron
A lot of modern irons also have motion sensors built into the handle. Allowing it to cooldown or even turn off when it detects no activity, and automatically heat back up when it does. I can't be the only one who has left an iron on overnight by accident. The TS100 custom firmware, https://github.com/Ralim/ts100 , also has features like detecting incoming voltage for use on lithium battery packs to prevent overdischarge. Pine64 even mentions they've sent a prototype to this developer.
In Pine64 announce the Pinecil, TS100 compatible RISC-V soldering iron

MAKE YOURSELF AT HOME

A few shortcuts

/
Search the collection
?
Open this guide
Esc
Close dialogs and navigation

Your saved repositories and interests stay in this browser.