HackerReposA FIELD GUIDE TO OPEN SOURCE
ProSponsor the shelf♧ 0
← Back to top all-time
Ralim
IronOS
C2017–2026
Ralim / IronOS

IronOS

Open Source Soldering Iron firmware

17Distinct people
22Mentions
1Explicit recommenders
8.4KGitHub stars
REPOSITORY AT A GLANCE

What to know before exploring

What it is

Open Source Soldering Iron firmware

GitHub

Where it is used

No documented product use was verified in the last source check.

What people are saying

Oh boy, nice idea, but this looks complicated and time consuming. I recommend to get some good equipment first: - solder fume extractor (see below) - extra thin high quality…

sandreas used a recommendation phrase. One indexed comment matches. This is a phrase match, not a verdict.

No classified warning is attached to this page. Read the discussions before treating silence as approval.

Also in these discussions

No other repository is repeatedly linked in the same discussions.

This week on Hacker News

Nov 9–Nov 16 UTC · Direct repository links and separately labeled related project stories. Indexed through 11/16/2026, 4:59:52 AM UTC.

No direct repository links were found in the indexed HN discussions over the past seven days. Older discussions are available below.

Mentions over time

HN mentions by year22 dated mentions

Observed mentions: 2017-07-25 21:15:49 UTC to 2026-09-03 15:37:00 UTC.

02462017-01-01 00:00:00 UTC to 2018-01-01 00:00:00 UTC (exclusive): 1 mentions; 0 submissions, 1 comments20172018-01-01 00:00:00 UTC to 2019-01-01 00:00:00 UTC (exclusive): 0 mentions; 0 submissions, 0 comments2019-01-01 00:00:00 UTC to 2020-01-01 00:00:00 UTC (exclusive): 0 mentions; 0 submissions, 0 comments2020-01-01 00:00:00 UTC to 2021-01-01 00:00:00 UTC (exclusive): 3 mentions; 0 submissions, 3 comments2021-01-01 00:00:00 UTC to 2022-01-01 00:00:00 UTC (exclusive): 1 mentions; 0 submissions, 1 comments20212022-01-01 00:00:00 UTC to 2023-01-01 00:00:00 UTC (exclusive): 3 mentions; 0 submissions, 3 comments2023-01-01 00:00:00 UTC to 2024-01-01 00:00:00 UTC (exclusive): 7 mentions; 1 submissions, 6 comments2024-01-01 00:00:00 UTC to 2025-01-01 00:00:00 UTC (exclusive): 4 mentions; 0 submissions, 4 comments2025-01-01 00:00:00 UTC to 2026-01-01 00:00:00 UTC (exclusive): 0 mentions; 0 submissions, 0 comments2026-01-01 00:00:00 UTC to 2027-01-01 00:00:00 UTC (exclusive): 3 mentions; 0 submissions, 3 comments. Incomplete calendar period.2026*

* An incomplete calendar period is marked with an outlined bar. Its count is not directly comparable with a full period.

Counts come from the repository’s dated source evidence. Index cutoff: 2026-11-02 08:16:59 UTC.

View mention counts and date ranges
UTC ranges include their start and exclude their end. Select a period to filter the source evidence.
PeriodStart (UTC)End (exclusive, UTC)MentionsSubmissionsComments
20172017-01-01 00:00:00 UTC2018-01-01 00:00:00 UTC101
20182018-01-01 00:00:00 UTC2019-01-01 00:00:00 UTC000
20192019-01-01 00:00:00 UTC2020-01-01 00:00:00 UTC000
20202020-01-01 00:00:00 UTC2021-01-01 00:00:00 UTC303
20212021-01-01 00:00:00 UTC2022-01-01 00:00:00 UTC101
20222022-01-01 00:00:00 UTC2023-01-01 00:00:00 UTC303
20232023-01-01 00:00:00 UTC2024-01-01 00:00:00 UTC716
20242024-01-01 00:00:00 UTC2025-01-01 00:00:00 UTC404
20252025-01-01 00:00:00 UTC2026-01-01 00:00:00 UTC000
2026 (partial)2026-01-01 00:00:00 UTC2027-01-01 00:00:00 UTC303

What Hacker News says

3 sources
sandreas·Sep 27, 2022Recommendation phrase
Oh boy, nice idea, but this looks complicated and time consuming. I recommend to get some good equipment first: - solder fume extractor (see below) - extra thin high quality tin - a desoldering pump AND desoldering wire - high quality flux - a TS 100 soldering Iron with KU tip from ali express for 50 bucks - optional: USB-C Power Adapter for your existing power supply (so you don't have to buy one) - optional: a soldering mat (normaly blue colored) and you have a near professional equipment for about $120. Now flash IronOS[1] on your soldering Iron, and it works even better. Instructions: - turn on solder fume extractor - heat iron to 370° Celsius (but be careful depending on your workpiece) - Tin both ends beforhand - better slightly more flux to put on (but not for small works) - if flux has been applied, clean
Read the rest
ing up with e.g. toothbrush & isopropyl alcohol after you're done maybe a good idea However, the most important peace of hardware is a solder fume extractor... I'm surprised that so many youtube "professionals" don't put a hint on this - never play with your health. This can even be done DIY (see youtube tutorials). High quality flux is also important because of your health. Chinese sellers often don't care about ingredients... High quality tin is much easier to work with and costs 5 bucks more than low quality tin. It is worth. [1]: https://github.com/Ralim/IronOS
In Soldering Wires – Here's a different way
> Pinecil from the open-source TS100 iron The Pinecil is Pine64’s most polished product, and I congratulate them for getting such a high-quality soldering iron down to such a low price point ($26). https://www.pine64.org/pinecil/ Even if the Pinecil weren't open hardware running on open firmware, it would still be an incredible value. But it is, and my only criticism is that the rewritten firmware flashing tool does not yet support Linux (the older version does work). Other than this, the Pinecil is a gem and an example of the Pine formula at its best. - Pinecil documentation and schematics: https://wiki.pine64.org/wiki/Pinecil - IronOS: https://github.com/Ralim/IronOS - PINE64 Updater: https://github.com/pine64/pine64_updater
In The Pine Formula
Of course you don't need an OS and a 32-bit computer in your soldering iron, but they are nice. An OS is nice because you can have multiple real-time tasks with different priority levels, so that you can, for example, update the screen without worrying that it will screw up the PID control loop maintaining the iron's temperature. You don't need a screen, but a screen is nice because you can see what temperature the iron is set to and what temperature it's measuring. This makes it easier to set the temperature. Also IronOS lets you set the cutoff voltage so you don't kill your batteries by draining them down to zero, and it has an option to correct inaccurate temperature readings from the tip by calibrating the tip. PID temperature control is nice, not only because the iron is ready for use much more quickly, consumes much less energy (m
Read the rest
aking battery power practical), and weighs less, but also because it allows you to solder things to big copper pours without overheating your iron all the time, which means you burn components and lift traces a lot less often. This is especially nice if a heat-damaged component might not fail until after the circuit board is on orbit, which makes it impractical to replace, or until it's in use in a life-critical application, which makes replacement the least of your worries. But you don't need it. A 32-bit processor is nice because it means you can use 32-bit math for everything instead of constantly worrying about overflow. Also, you can address the entire 128 KiB of Flash without shitty memory segmentation headaches when you're writing the firmware. 128 KiB of Flash is nice because it's easy for even a single person to write more than 64 KiB of code, even with RV32C's superior code compactness and without using libraries — though, to be fair, an alternative way to get 128 KiB or 256 KiB of code space is to make your code space word-addressed instead of byte-addressed, and then make your instructions 16 bits or 32 bits long. Generally this requires a Harvard architecture, which is common in microcontrollers but not ideal. None of these nice things requires or even benefits from a division instruction (though in practice they probably do need interrupt handling and illegal-instruction traps, which could be used to emulate division if it were really necessary). So I always thought it was kind of goofy that the M multiply-instruction extension, crucial to DSP work, was saddled with this white elephant of hardware division support. I'm glad to see that's fixed as far as it can be with Zmmul. The GD32VF103 used in the Pinecil doesn't have memory protection, so IronOS https://github.com/Ralim/IronOS might not be the kind of operating system you're thinking it is. It doesn't have, for example, a filesystem, a command prompt, a GUI, a task list UI, or a networking stack. I don't even think tasks are created and destroyed at runtime; all the running tasks are compiled into the OS image. Having an OS and a 32-bit microcontroller in your soldering iron might be a terrible idea: for example, it could include malware that displays advertisements or disables your soldering iron if you haven't paid your monthly subscription. The Pinecil solves this problem by being 100% free software, so that even if the IronOS maintainers try to pull something like that, you have the freedom to fork their code and remove the malware. You still have the problems that the iron can have more complicated malfunctions and is harder to repair than an iron that is just a resistor that plugs into the wall. But I think the advantages of tighter control more than make up for that. But if you really need to, you can solder your circuits by heating up a chunk of brass in the flame of your gas stove, then pressing it to the circuit board before it cools off. I've done it. But I'd rather not.
In RISC-V announces first new specifications of 2022 adding to 16 ratified in 2021

MAKE YOURSELF AT HOME

A few shortcuts

/
Search the collection
?
Open this guide
Esc
Close dialogs and navigation

Your saved repositories and interests stay in this browser.